With server selection and quantity as the only input, the platform auto-derives the full-system sizing for power, cooling, UPS, fire protection, DCIM and more from power draw and heat load. You can also open any module to refine the calculation independently.
The derivation gives an overall sizing. Enter each module to refine and verify with real parameters (tariffs, cooling method, extinguishing agent, monitoring points, etc.).
Utility feed, transformers, UPS, PDU distribution; total power, annual energy, electricity cost and carbon, with currency shown by the visitor's region.
Open module →Compare air-cooled / indirect evaporative / liquid cold-plate / immersion; cooling capacity, airflow, chilled-water flow and cooling power.
Open module →Plan rack count by rack type and power density, estimate total IT load and floor area; built-in NVIDIA / AMD GPU quick selector (auto rack cards & power by rack U).
Open module →UPS capacity and redundancy (N / N+1 / 2N), battery backup time, diesel generator capacity and unit count.
Open module →Gas suppression (FM200 / IG541 / IG100) agent estimation, smoke & heat detector counts and compartmentation advice.
Open module →Data-center infrastructure management: monitoring module list, sensor point estimation, PUE analytics and alarm integration planning.
Open module →Recommended flow: 1. choose server model + quantity → click “Generate recommended configuration” to see the full plan → refine in each module (Power → Cooling → Racks → Backup Power → Fire → DCIM) with real parameters. All modules give engineering estimates; actual designs must be developed by design institutes and equipment vendors.